Build Products Northwest
carbon-fiber-1.png

Updates

News and updates from around the Northwest

The Pipemaster Pro

The Antex Pipemaster Pro is designed to provide a clean and safe solution for making soldered joints of copper pipes. 
  The tool  does not  require  												any special fittings just  												standard presoldered or  												non-presoldered copper joints.  
  The Pro Tool has more than twice  												the power with Temperature  												Control of our DIY tool, the Pro  												with clean heads and good  												contact can make 1/2 joints in  												under 10secs. The temperature of  												the heads is maintained around  												950 F, this enables the user to  												make more joints quickly and  												efficiently, whilst being safe  												and without the worry of a Naked  												Flame.  
   The advantage off temperature  												control is that less heat is  												applied to the joint, this  												prevents the heat build up in  												the pipes. The heat build up can  												make disassembly of systems hard  												work because the pipe expands  												into the joint, the Pro prevents  												the heat build up making  												disassembly easy. The other  												advantage using the temperature  												controlled version and  												preventing heat build up, is  												when you are using freezing tool  												to block the fluid flow. The  												lower heat build allows the user  												to make the joint closer to  												the frozen section of the pipe.   
   The unit is also suitable for  												the professional who has to make  												a joint but where the  												flame could cause more damage.  												(under counter tops, along  												skirting boards etc).   
   CHECK OUT THE VIDEO

The Antex Pipemaster Pro is designed to provide a clean and safe solution for making soldered joints of copper pipes.

The tool does not require any special fittings just standard presoldered or non-presoldered copper joints. 

The Pro Tool has more than twice the power with Temperature Control of our DIY tool, the Pro with clean heads and good contact can make 1/2 joints in under 10secs. The temperature of the heads is maintained around 950 F, this enables the user to make more joints quickly and efficiently, whilst being safe and without the worry of a Naked Flame.

The advantage off temperature control is that less heat is applied to the joint, this prevents the heat build up in the pipes. The heat build up can make disassembly of systems hard work because the pipe expands into the joint, the Pro prevents the heat build up making disassembly easy. The other advantage using the temperature controlled version and preventing heat build up, is when you are using freezing tool to block the fluid flow. The lower heat build allows the user to make the joint closer to the frozen section of the pipe. 

The unit is also suitable for the professional who has to make a joint but where the flame could cause more damage. (under counter tops, along skirting boards etc).

CHECK OUT THE VIDEO

buildproductsComment