carbon-fiber-1.png

Updates

News and updates from around the Northwest

Williams - High-Efficiency Direct-Vent Furnaces
A high-efficiency, low-profile furnace that may be installed nearly anywhere. Great for homes, apartments, offices, garages and room additions!
Just minutes are all that is needed to warm up your room while enjoying the moneysaving, high-efficiency…

A high-efficiency, low-profile furnace that may be installed nearly anywhere. Great for homes, apartments, offices, garages and room additions!

Just minutes are all that is needed to warm up your room while enjoying the moneysaving, high-efficiency design, modern appearance and low-cost installation.

Williams' high-efficiency direct-vent furnaces require no inside air for operation. making them an ideal choice for safe operation to add comfort to nearly anyplace heat is needed.

 

Design Features

  • Efficiency Ratings:

           - 7,400 Btu/hr. Series: 79%
           - 17,700 and 29,000 Btu/hr. Series: 82%

  • Easy installation -- all vent material included
  • Attractive, durable fresh-white finish.
  • Natural and propane models
  • Unique wall-mount design frees up floor space
  • Small, low-profile vent size
  • Sealed-combustion safety technology uses no inside room air for operation.

 

buildproductsComment
Delta Breez Ventilation Systems

A new bathroom ventilation solution for the green generation. The new Delta Breez Ventilation Fans deliver an aesthetically pleasing ventilation solution that consumes less power and operates more quietly than most AC motor products in the market.

buildproductsComment
Delta Breez Signature Series with Humidity Sensor

10 Key Points About Delta Breez:

1. Complete line -  Builder. Signature & Slim Series
2. Great, Great Attention to Quality
3. Great Price
4. Strong well established company
5. QUIET, QUIET, QUIET
6. All DC Brushless motors
7. All Energy Star Rated
8. Engineered to run continuously for 70,000 hours, or 8 years
9. Have soft start and lock protection functions
10. They ship out of their U.S. headquarters in California

buildproductsComment
Sil-Fos® Rings are now available. Look for displays today!

Lucas-Milhaupt Sil-Fos® Rings for brazing copper tubular components. Braze™ rings are easy to use, minimize waste, and provide visual verification of a complete, sound braze joint.

To use:

  • Clean the areas to be brazed using a wire brush or abrasive paper
  • Insert ring into fitting and insert tube - make sure tube makes contact with ring at bottom
  • Uniformly heat of braze area - Alloy is drawn by capillary action to top of joint providing visual verification of sound braze joint

Brazing rings are available for 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1-1/8" standard copper tubing. Brazing rings are stocked by major Lucas-Milhaupt HVAC/R distributors.

For Informative Video Click Here.

buildproductsComment
More lives are lost to indoor air pollution issues than alcohol-related car accidents in the United States each year
IAQ has been identified by the Environmental Protection Agency (EPA) as  one of the five most urgent environmental risks to public health. In  fact, more lives are lost to indoor air pollution issues than  alcohol-related car accidents in the Unit…

IAQ has been identified by the Environmental Protection Agency (EPA) as one of the five most urgent environmental risks to public health. In fact, more lives are lost to indoor air pollution issues than alcohol-related car accidents in the United States each year. The National Cancer Institute estimates that radon gas was the cause of between 15,000 and 22,000 lung cancer deaths in 2010.

Globally, it is estimated that indoor air pollution is the cause of 1.6 million deaths each year.

CLICK HERE FOR FULL ARTICLE

buildproductsComment
Sil-Fos® Brazing Rings Demo

Lucas-Milhaupt Sil-Fos® Rings for brazing copper tubular components. Braze™ rings are easy to use, minimize waste, and provide visual verification of a complete, sound braze joint.

Build Products Northwest Demo

June 2012 - Portland, Oregon

 

To use:

  • Clean the areas to be brazed using a wire brush or abrasive paper
  • Insert ring into fitting and insert tube - make sure tube makes contact with ring at bottom
  • Uniformly heat of braze area - Alloy is drawn by capillary action to top of joint providing visual verification of sound braze joint
buildproductsComment
Z-Line® Series ZXP and HXP Pleated Filters
The Glasfloss Z-Line Series ZXP and HXP self-supported pleated filters  offer MERV 8 efficiency with superior durability and low pressure drop. The Z-Line Series features a uniform 100% synthetic, self-supporting  media design that achieves a MERV…

The Glasfloss Z-Line Series ZXP and HXP self-supported pleated filters offer MERV 8 efficiency with superior durability and low pressure drop. The Z-Line Series features a uniform 100% synthetic, self-supporting media design that achieves a MERV 8 per the ANSI/ASHRAE 52.2 Test Standard. 

The Z-Line pleated filters are 100% incinerable since there are no metal parts used within the construction.  The Z-Line ZXP and HXP incorporate exclusive double wall internal torsion box technology.  The pleated filters can withstand greater abuse in shipping and handling due to the absence of metal component parts as well as the durable self-supporting filtration design. 

The Z-Line self-supporting pleated filters offer excellent performance and value for a large array of applications.  The Z-Line ZXP and HXP filters are environmentally friendly and have less impact on landfills.

buildproductsComment
Great New Product - Lucas-Milhaupt Sil-Fos® Rings

Lucas-Milhaupt Sil-Fos® Rings for brazing copper tubular components.

Braze rings are easy to use, minimize waste, and provide visual verification of a complete, sound braze joint.

Video shows the necessary steps for a successful braze joint.

Brazing rings are available for 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1-1/8" standard copper tubing. Brazing rings are stocked by major Lucas-Milhaupt HVAC/R distributors.

buildproductsComment
The Tape Master Foil Tape Gun....Great new HVAC Tape Gun

Supreme Industries announces the industry's first and only foil tape dispenser. Through the use of a secondary take up reel, The Tape Master removes the paper release liner and applies tape in a smooth application every time. This patented tool saves time, increases production and cuts expensive labor costs.

 

 

 

buildproductsComment