High deflection (four inch) spring mountings are often specified for microchip manufacturing because excess vibration effects yield. Mason has been servicing that industry for over forty years.

Plug In Plus Air Purification System

The Guardian Air Plug In Natural Air Purification System provides bacteria, mold, odor and VOCs (chemical odors) reduction. The advantage of the Guardian Air Plug In is its ability to be used in any room and be completely inconspicuous. The Guardian Air Plug In plugs directly into a wall outlet and can be used with or without its internal fan. Because it has its own outlets as part of the unit, you do not lose the wall outlet. The Guardian Air Plug In is an air treatment system not a filter.

For More Information or to Find a Contractor CLICK HERE

Up until the 1950’s most rubber mountings were designed to take the load in shear. Mountings were circular or sold in long strips, so the capacity could be controlled by size and durometer, or durometer and the cut off length.

Shear loading curves are straight line similar to steel springs. The deflection can be used directly in the frequency equation after dynamic stiffness correction. Unfortunately, shear mountings could and did fail because of bond failure between the rubber and metal. When overloaded, the mountings would bottom out. Compression mountings are less expensive for a given capacity and when overloaded, there is still a cushion. When loaded conservatively, the load deflection curve is similar to the straight line shear.

The general configuration of our N mountings was known, but all mountings were manufactured as at the right and seldom taller than 1”. Both the base plate and the upper tapped washer were exposed and they corroded. As foolish as it seems now, we cemented a rubber pad to the baseplate to provide friction. Since greater efficiency can only be accomplished by increasing deflection, when double deflection was needed, two mountings were bolted together. This was another makeshift arrangement.

For more information CLICK HERE

Product Overview

AL 822 is a low temperature solder ideal for brazing or soldering aluminum to aluminum or aluminum to copper. Non corrosive flux does not require removal after brazing. It is ideal for open air heating methods and very easy to use for aluminum brazing in HVAC/R applications.

Industry Applications:HVAC and refrigeration repair work, patching holes in aluminum coils in automotive units.

InnovairFlex™ duct smoke detectors combine an impressive collection of innovations to greatly simplify HVAC system monitoring. One unit can accommodate multiple installation footprints to overcome mounting constraints. Tool-free, plug-in sampling tubes speed and simplify installation. Broad temperature and humidity ranges accommodate exposure to environmental extremes. Easily visible status indications, readily accessible test feature, and a remote test station accessories simplify testing and maintenance. With its unmatched flexibility, InnovairFlex can adjust to fit any application.

To See All The Product Options CLICK HERE

Mini Split PHI-Air Purification System

The Mini Split PHI System by RGF® is a PHI Cell® technology. The product is easily mounted onto a mini split AC unit without modification by using hook-and-loop adhesive strips. The Mini Split PHI incorporates its own pull out reusable copper/silver ionic germicidal electro static filter and installs into any 100-277 VAC 50/60 Hz power supply (typically at the input power to the mini split unit).

Note: It is recommended these units be installed by a licensed electrician or HVAC professional

For More Information or to Find a Contractor CLICK HERE

The Microcon® 350 ‘whole home’ HEPA Air Filtration system is easily installed in your home’s HVAC or air handling system to provide 99.97% airborne particulate reduction without impacting air flow, static pressure or unit sizing. This whisper quiet air filtration system is extremely efficient for dust, pet dander, pollen and VOC removal. This unit is recommended for areas up to 2,625sq ft.

Check Out How Much My Unit Has been Filtering Out!

I use to Breath All This!!!!

For More Information or to Find A Contractor CLICK HERE

It’s winter… how is your adhesive working for you!

Boss adhesives work well in cold temps! For more info check out: https://bossproducts.com/

DIRECT-VENT FURNACES

Compact, space-saving furnaces featuring simple, low-cost installation.  Attractive and economical, Direct-Vent furnaces are a popular choice for heating the home.  14,000, 22,000 and 30,000 Btu/hr. sizes.

Direct-Vent Gravity

These models require no electricity and are great during power outages.

Design Features

• No electricity required

• “Matchless” pilot igniter

• Easy installation – all vent material included

• All vent caps include built-in “Bird Guard”

• Long-life, ceramic-coated combustion chamber (22,000 and 30,000 Btu/hr. models)

• Automatic temperature and safety controls

• Sealed combustion chamber requires no room air

• Attractive, durable, soft-white, scratch-resistant finish blend with any décor

• Natural and propane gas models (conversion kits available)

For More Information CLICK HERE

2nd award of the day.... love Mason.... Having a great week and it’s only day 1... rep life is good!

TYPE “C” Spring Mountings provide a packaged solution to troublesome vibration problems. Since the static deflection of the spring element is much greater than that provided by most rubber materials, these units will perform where it is necessary to establish low natural frequencies or to use a mounting that is more yielding than the supporting floor. Type “C” mountings are specifically designed for noise and vibration free application in critical areas on light concrete or wooden floors.

Semi-circular Neoprene sponge inserts limit movement during start and stop and prevent contact between the projections of the upper and lower semi-steel castings. These inserts are designed for a minimum of damping in all directions to allow the springs to function properly and develop installed efficiencies that are very close to the theoretical. Non-adjustable inserts are recommended for all air conditioning applications under compressors, air handling units, centrifugal fans and most other constant frequency vibration problems.

For More Information CLICK HERE

Wow…. time flys….

BOSS® 125 Multi-Seal® Building Construction Sealant

• All weather plastic cartridge

• Applies the same in all seasons

• Bonds to wet, damp surfaces

• VOC Compliant

• Paintable under an hour. Test small area for compatibility before painting, Translucent not paintable.

For More Information CLICK HERE

ArmaFlex Shield

Continuous Coil Pipe Insulation

New ArmaFlex® Shield flexible foam insulation from Armacell is a moisture-resistant and UV-resistant product with a durable protective jacket specially designed for line set, HVAC and refrigeration applications. This tough coating can take the abuse of challenging installations and stands up to the effects of weather and extreme elements like UV, heat and cold, making it a great choice for outdoor applications.

For More Information CLICK HERE

Toasty fire pit….

Safeflex expansion joints are molded and vulcanized in hydraulic presses. This high pressure process produces a smooth finished product with outstanding adhesion between the cover, reinforcement and tube.

Most of our competitors still use Natural Rubber impregnated Nylon tire cord between sulfur cured, EPDM covers and tubes. This construction becomes brittle with age at higher temperatures, so we changed from Nylon to Kevlar®, as Kevlar® has a higher modulus that minimizes swell and elongation, and outstanding temperature tolerance up to 250°F (121°C).

For More Information CLICK HERE

•New revolutionary REME-LED™ technology, long life and environmentally friendly

•New hybrid hydrophilic catalyst incorporating the industry’s first washable ceramic catalyst

•Includes automatic self-cleaning ionizers with carbon fiber brushes to reduce particulates (Patent Pending)

•Unlimited cycling capability designed to turn on/off with the HVAC system

•24 VAC/DC input (24 VAC transformer included)

To See Video: CLICK HERE

Use our new selection guide to choose from over 50 Delta Breez fans, with feature options such as single or dual speed; dimmable LED lighting; humidity and/or motion sensing; heater; low speed continuous operation; decorative; and fun Bluetooth® capability to fit any application or budget.

To find the best fan for you CLICK HERE

BOSS® 333 Gap Filling Foam Genius Gun

• Use for insulating around pipes, cables and blank openings, gaps and cracks

• Weatherproofs against wind and moisture

• Can be cut, sanded and painted

For More Information CLICK HERE