Build Products Northwest
carbon-fiber-1.png

Updates

News and updates from around the Northwest

Mason - Noise & Vibration Control Products for EVERY Market...

Mason Industries has been a leader in the field of noise, vibration and seismic control for over 50 years.

Mason products are specified by consultants and architects here and throughout the world. In addition to a complete range of mountings, hangers, and flexible connectors for mechanical equipment, we provide computer studies for snubbing systems in earthquake and bomb blast zones. Floating floors, walls and suspended ceilings provide total acoustical room isolation. Rubber bearing pads and spring mountings are used to support entire buildings and railroads. Our professional engineering staff is here to serve you in every way.

For More Information CLICK HERE

Mike McNultyComment
The next generation of IAQ technology....

The REME HALO

Reme Halo

Reme Halo

PRODUCT DESCRIPTION

The REME HALO by RGF® is the next generation of IAQ technology. RGF has redesigned their REME HVAC unit with higher Ionized Hydro-peroxide output, which gives faster kill rates for microbials in the air as well as on surfaces. Also, this higher output drops more particulate from the air bringing relief to those who suffer from allergies and other respiratory issues.

 

For More Information CLICK HERE

Mike McNultyComment
Williams: HIGH EFFICIENCY DIRECT-VENT FURNACES

A low profile furnace that may be installed nearly anywhere.

Great for homes, apartments, offices, garages and room additions.  Natural and Propane models. 7,400, 17,700 and 29,000 Btu/hr.

Design Features

  • ‰Efficiency Ratings:
    • 7,400 Btu/hr. Series:  72% Thermal Efficiency
    • 17,700 and 29,000 Btu/hr. Series:  81% Thermal Efficiency
  • Natural and propane gas models
  • Easy installation — all vent material included ‰
  • Attractive, durable fresh-white finish. ‰
  • Natural and propane models ‰
  • Unique wall-mount design frees up floor space ‰
  • Small, low-profile vent size ‰
  • Sealed-combustion safety technology uses no inside room air for operation

For More Information CLICK HERE

Mike McNultyComment
RGF - Mini-Split IAQ Product

The Mini Split PHI Cell by RGF® is designed to eliminate sick building syndrome risks by reducing odors, air pollutants, VOCs (chemical odors), smoke, mold bacteria and viruses.

The Mini Split HVAC-PHI Systems are easily mounted onto air conditioning unit without modification of the unit using hook and loop adhesive strips. The Mini Split incorporates it's own pull out reusable copper/silver ionic germicidal electro-static filter. When the HVAC system is in operation the Mini Split HVAC-PHI Cell creates an Advanced Oxidation Process consisting of: Hydro-peroxides, super oxide ions and hydroxide ions. All are friendly oxidizers. By friendly oxidizers we mean oxidizers that revert back to oxygen and hydrogen after the oxidation of the pollutant. 

For More Information CLICK HERE

Mike McNultyComment
Beckett Ice Machine Pumps

Beckett's Ice Machine Replacement Pump meets or exceeds the ridgid specifications of Original Equipment Manufacturer's. This pump is driven by a thermally protected motor that features dual bearings and a stainless steel shaft. Our BRPAP1 is an all purpose replacement pump that features a dual voltage (115/230V), dual frequency (50/60Hz) motor. Maximum flow rate is 730 gph @ 2'. It comes with 5 discharge adaptors and 4 impellers - a must have for every service truck. This pump can be used in the majority of commercial ice makers, such as: Crystal Tips, Ice-O-Matic, Scotsman, Manitowoc, Ross Temp, Carrier and York. 

For More Information CLICK HERE

Mike McNultyComment
Seal Small Leaks!!!!! NEW From Spectroline - - COOL SEAL

A/C Leak Sealer

 

Seals slow, pesky leaks in compressors, condensers, evaporators, O-rings and hoses – quickly and permanently. Non-polymer, oil-soluble formula is safe for AC&R system components and recovery equipment. Also ideal for preventive maintenance!

 

  • Works in all popular AC&R systems, including high-pressure R-410A systems
     
  • Seals leaks as large as 0.020 inch (0.5 mm)
     
  • An alternative to expensive parts replacement on older AC&R systems
     
  • Remains safely in system to help protect against future leaks
     
  • Meets ASHRAE 97 standard for chemical stability
     
  • Available in two convenient delivery methods

For More Information CLICK HERE

Mike McNultyComment
BOSS 125 - The Beast Multi-Seal Product..... All Weather - Rain or Shine.....

DESCRIPTION

BOSS® 125 Multi-Seal® Building/Construction Sealant is a multi- purpose, one part sealant, formulated with USPTM Technology. This unique sealant is free from solvents and isocyanates. It cures on exposure to atmospheric moisture to form a highly durable flexible sealant.

BOSS® 125 Multi-Seal® has been formulated to offer outstanding primerless adhesion to most common building materials including vinyl, aluminum, steel, concrete, wood and glass. It can be applied and tooled under most weather conditions. This sealant is paintable with most latex base paints*.

*Test small area for compatibility before painting 

FEATURES 

• Wide temperature gunnability; can be applied in any season 

• Primerless adhesion to damp and non-porous surfaces

• VOC Compliant in all 50 states

• Qualifies for LEED Credits 

• Ease of use, one-part adhesive sealant, no mixing required 

• Good weatherability - virtually unaffected by sunlight, rain, snow, ozone, and temperature extremes 

• Good UV resistance and color stability 

• Long life reliability; cured sealant stays flexible without tearing, cracking, drying out, or becoming brittle. 

• With its non slump properties, can be used in vertical, horizontal and overhead joints 

• Non-yellowing and non-staining

• Non-streaking

• Paintable with most latex base paints* (except Translucent) • Free from solvents and isocyanates

• Bonds to Kynar 500® 

Mike McNultyComment